JP-AXE001

JAY PARTS bushing & sleeves kit A-Arms rear Polaris Ranger XP 570 & 900
The sleeves are made of hardened stainless steel, only the best is good enough for our claim!
PE-GL with oil additive was used for the bushings as a wear-resistant material. In order to ensure all-round lubrication, they were equipped with an internal spiral groove. An O-ring seals against dirt and water.

FEATURES
- Made in Europe
- hardened stainless steel sleeves
- stainless
- PE-GL bushings with oil additive
- inside spiral groove
- sealed with O-rings

DELIVERY PER KIT
8 sleeves
16 bushings (pre-assembled with O-rings)
One kit is for both sides for the rear on the frame side (left and right).

WORKS WITH THE FOLLOWING MODELS
Polaris Ranger XP 570 & 900 rear on the frame side( NOT Ranger 570 Midsize )

ATTENTION ON ASSEMBLY
Don´t hit the bushings with a hammer!
Put enough grease in the bushings before installation.
Please fill in grease on the grease press only until a first resistance occurs.
Grease must not ooze out!

RECOMMENDATION
We reccomend using water resistant grease when installing, BEL RAY Waterproof you can find in our shop.