JAY PARTS bushing & sleeves kit A-Arms front Polaris General 1000 (2017- )

The sleeves and seal cups are made of hardened stainless steel, only the best is good enough for our claim!
PE-GL with oil additive was used for the bushings as a wear-resistant material. The O-ring in the stainless steel sealing cap seals against dirt and water.

FEATURES
- Made in Europe
- hardened stainless steel sleeves
- hardened stainless steel seal cups with O-ring
- PE-GL bushings with oil additive

DELIVERY PER KIT
6   sleeves
14 bushings
12 seal cups (pre-assembled with O-rings)
4   sleeves with seal cup (pre-assembled with O-rings)

One kit is for both sides for the front on the frame side (left and right).

WORKS WITH THE FOLLOWING MODELS
Polaris General 1000    2019 -

ATTENTION ON ASSEMBLY
Don't hit the bushings with a hammer!
Apply a little grease to the screw to avoid corrosion. Grease the O-ring and use the grease on the inside of the bushing extensively.

RECOMMENDATION
We reccomend using water resistant grease when installing, BEL RAY Waterproof you can find in our shop.