JAY PARTS Bushing & Sleeves Kit A-Arms rear Arctic Cat 400-1000+TRV

The sleeves are made of hardened stainless steel, only the best is good enough for our claim!
PE-GL with added oil is used as a self-lubricating, wear-resistant material for the bushings. Sealing against dirt and water takes over an O-ring.

FEATURES
- Made in Europe
- hardened stainless steel sleeves
- stainless
- PE-GL bushings with oil additive
- sealed with O-rings

DELIVERY PER KIT
8 sleeves
16 buschings (pre-assembled with O-rings)
One Kit is for both sides rear (left and right).
Replaces part numbers: 0403-409 + 0403-438

WORKS WITH THE FOLLOWING MODELS
Arctic Cat / Textron 400–1000 + TRV (not Alterra models)

ATTENTION ON ASSEMBLY
Don´t hit the bushings with a hammer!
Put enough grease in the bushings before installation.
Please fill in grease on the grease press only until a first resistance occurs.
Grease must not ooze out!

RECOMMENDATION
We reccomend using water resistant grease when installing, BEL RAY Waterproof you can find in our shop.

PLEASE NOTE
Unfortunately, Arctic Cat has large tolerances in the paintwork in the bushing area of the Alterra A-Arms. One of the reasons for the large bushing wear of the OEM bushings.

Our Jay Parts bushings have a slight oversize of 0.10 mm, and we have also provided them with the Jay Parts helical groove to create a grease depot.

OEM Arctic Cat socket 0403-409 (production 2018): 21.95mm
Jay Parts socket: 22.06 mm