JAY PARTS FLASH & Licence for Power Vision 3/4 Polaris Scrambler/Sportsman

JAY PARTS FLASH & Licence for Power Vision 3/4 Polaris Scrambler & Sportsman (all) 1000 / 1000 S up from year2016

Works with all models with Ride by Wire / Electric throttle (without throttlecable)
If you already have a Power Vision 3 or 4, we would be happy to write the optimized software for you.

The following settings can be changed/optimized:
✓ ignition matched to European gasoline
✓ gas mixture optimized
✓ fan turns on earlier and turns off later
✓ rev limiter raised
✓ torque limit raised
✓ final speed not limited
✓ emergency program (limp mode) is only limited to overheating

Sport exhaust and sports air filter is recommended to get the maximum power outpud.

The ECU race update has been developed for motor sports and extensively tested. The vehicle has a completely different character after. A power commander does NOT need to be used additionally.

IMPORTANT:
Do not drive faster than the original speed limit. A higher load on belts and drive shafts is possible due to the higher performance.

No warranty on engine, transmission, powertrain and attachments.
Guaranteed driving pleasure!

WORKS WITH THE FOLLOWING MODELS
Polaris Scrambler 1000, 2016 - current (with Ride by Wire)
Polaris Sportsman 1000, 2016 - current (with Ride by Wire)
Polaris Scrambler 1000 S, 2021 - current (with Ride by Wire)
Polaris Sportsman 1000 S, 2021 - current (with Ride by Wire)

ATTENTION:
Print the form, signe it and send it to Jay Parts with the data and PV-Info. Without the form we can not optimize any ECU
Download ECU update form