JAY PARTS bushing & sleeves kit A-Arms front Polaris Sportsman 1000 (2018- )

JAY PARTS bushing & sleeves kit A-Arms front Polaris Sportsman 1000 (2018- )

The sleeves and seal cups are made of hardened stainless steel, only the best is good enough for our claim!
PE-GL with oil additive was used for the bushings as a wear-resistant material. The O-ring in the stainless steel sealing cap seals against dirt and water.

FEATURES
- Made in Europe
- hardened stainless steel sleeves
- hardened stainless steel seal cups with O-ring
- PE-GL bushings with oil additive

DELIVERY PER KIT
8   sleeves
16 seal cups (pre-assembled with O-rings)
16 bushings small

One kit is for both sides for the front on the frame side (left and right).

WORKS WITH THE FOLLOWING MODELS
Polaris Sportsman 1000    2018-
Polaris Sportsman Touring 1000     2019-
For US models, please check the design!

ATTENTION ON ASSEMBLY
Don't hit the bushings with a hammer!
Apply a little grease to the screw to avoid corrosion. Grease the O-ring and use the grease on the inside of the bushing extensively.

RECOMMENDATION
We reccomend using water resistant grease when installing, BEL RAY Waterproof you can find in our shop.